JINDAL'S rectifier equipments are wound with electrolytic Prime grade italics to minimise power losses, in comparison to Aluminium italic conductor used by many other manufactures. Our equipments are designed liberally as per capacity and are ideally suitable for marginal over loading conductions.
We use vertical Rolling contact type voltage regulator wound with heavy section of copper strips suitable for 100% continuous duty cycle for industrial applications, in comparison to conventional wire wound Regulators used by other manufacturers. The carbon rollers move on both sides of the winding.
DIODE: Silicon diodes are tested in house, similar PIV batch and same forward drop diodes are used in the equipment for equal load sharing and reducing the power losses of diodes.
LAMINATION CORE: We use imported CRGO Lamination core which have minimum power losses and results in better efficiency of equipment and saving in energy bill.
PAINTS: Epoxy paint is used which is resistant to acidic environment of plating process and enhance the life of the equipment by preventing it from corrosion.
METER: We use digital DC meters which are very accurate and durable.
CONSTANT VOLTAGE CONTROLLER (CVC) (OPTIONAL): We offer CVC Electronic attachment with rectifier equipments, which will maintain constant Output Voltage or Current as per setting automatically-irrespective of input voltage variation.
SERVICING: JINDAL'S have maintained enviable reputation in market in after sales services. This fact can be varified from any of our customers.
JINDAL'S Rectifiers equipments come with an unmatched FIVE YEAR GUARANTEE against any manufacturing defects from the date of supply. We do not charge anything for the visits, spare parts and labour during the guarantee period.
Note: Diodes are not prone to ageing and get damaged only due to short circuit on the output side, hence the same are not covered under guarantee
|Output Voltage : From zero to max. rated D.C. voltage (upto 1000 Volts)|
|Output Current : From zero to max. rated D.C. current (upto 3000 Amps)|
|Input Voltage : 415V, 3-phase, 50 Hz, A.C.|
|Natural Oil cooled|
|Modes of Operation : Manual Control|
|Ripple Content: Less than 5%|
|• Model with 1% ripple available as optional feature|
Note: Non-standard models are also available against specific requirements.